How Much Does Appliance Repair Cost?

Learn the average cost for hiring professional appliance repair from EZ Whittier Appliance Repair:

Your kitchen is full of large electrical appliances. An electrical oven, dishwasher or refrigerator requires the right wiring. If an electrical appliance is incorrectly installed, it will pose a real chance of starting a fire. To be sure your electrical appliances are installed correctly, it’s important to call a trained service for appliance repair in Whittier, California.

DIY electrical service for appliances is not a recommended idea. There are one or two small repairs where ”do-it-yourself” is be possible. In those cases, just be sure to use the proper tools and to turn off the power.

Troubleshooting large kitchen appliances, however, is more difficult. You should not attempt DIY repair. Your stove, for example, can require a 250- or 125-volt circuit depending on if it is gas-powered or electrical, and you will need to have a minimum of two 20-amp, 125-volt circuits to run smaller kitchen appliances. These circuits are able to power a couple of outlets, just don’t overload them — which means, a third is necessary.

The possibility of a short (which might cause serious injury or possibly death) during any larger job usually will not be worth it. Instead call for appliance repair.

You will want to search for appliance repair companies in Whittier on the internet. Look for companies with good reviews. Or find a a referral from a friend if you’re experiencing difficulties with an oven, freezer or refrigerator.

Hiring professional appliance repair technicians begins with contacting a contractor in Whittier that has experience doing repair of kitchen appliances. Some companies are appliance-specific, and don’t provide repair for all types of appliances.

The single reason a lot of local appliance repair services won’t be a good choice to service a kitchen appliance is due to all of the electrical appliances that need water to run. Most refrigerators require water to make ice and , of course, dishwashers always use water to run. Water is potentially dangerous when it comes to electrical repairs.

If electrical work is not completed properly and a waterline ruptures, just one example, there’s a very good possibility of electrocution. Electricity and water don’t mix.

That’s why you should hire a Whittier contractor who knows how to deal with both.

Experienced appliance repair technicians often charge in the neighborhood of $40 to $60 an hour for repairs, and solo contractors may charge between $75 and $115 per hour. This might seem too expensive, that’s because it’s better to pay a higher price for top-notch work. If a “professional” costs less than $35 per hour, you should be skeptical.

Be sure the contractor has a permit from Whittier for any kind of electrical repairs. Some low-quality services will argue they do not need a permit, but do not listen. Always confirm with Whittier officials.

Most technicians in Whittier can charge a small cost for their travel, from $50 to $60. You’ll have to pay the full fee regardless of if the repair is performed, so have a small list on-hand of appliances for them to inspect.

The average is $150 for dishwasher repairs – companies in Whittier often charge $80 to $125 an hour. Plan to expect a $40 to $80 trip charge too for the company to travel and troubleshoot the problem.

The average cost of brand new appliances range somewhere between $325 and $7,500. The broad range is dependent on the type of kitchen appliance, such as a expensive refrigerator compared to a low-cost dishwasher.

Fixing or installing an electrical appliance is one of the most detailed repair jobs you can need in a home.

A way to sidestep these kinds of electrical issues is listening attentively to a contractor when he or she provides an estimate for service. Very specific types of wire need to be used dependent on the type of kitchen appliance, and the wiring colors (for ground and neutral) might change when laws or requirements are revised.

In addition, most jurisdictions require arc fault protection for kitchen circuits and ground fault circuit interruption (GFCI) protection. If the contractor doesn’t mention this, or implies you don’t “need” them, you should call someone else.

Also, it is important to watch a technician attentively when he or she completes the first inspection of the oven. If it is a brand appliance the repairman is going to install, question if it can use the same circuit or might need an upgrade since there are noticeable size and electrical power use differences in the most recent models. The same recommendation can be applied to dishwashers and stoves.

professionals should be willing to explain what it is they will do, why they need to do it and go over each part of the fee, which likely includes appliance parts, labor and sometimes miscellaneous. There are some appliance repair services willing to wave the service fee if service is completed.


Appliance Repair Tips
Appliance Safety
Repair or Replace Appliances
Refrigerator Parts